Looking for some inspiration for your next pergola project? Check out these three unique corner pergola ideas!
Checkout this video:
Traditional Corner Pergola
A pergola can definitely dress up the look of your yard and add some extra curb appeal. If you’re looking for something a little bit more unique than the traditional square or rectangular pergola, then you might want to consider a corner pergola. Corner pergolas can offer a variety of benefits and can be a great addition to any outdoor space.
Materials needed
A corner pergola can add a touch of elegance and style to any garden, and they’re relatively easy to build. Here are three unique corner pergola ideas, along with a list of materials you’ll need for each one.
1. Rustic Corner Pergola
-4x4x8 lumber (posts)
-2x4x8 lumber (rafters)
-1x6x8 lumber (purlin)
-1x2x8 lumber (trim)
-nails or screws
-stain or paint
-rope or twine
2. Modern Corner Pergola
-4x4x8 lumber (posts)
-2x4x8 lumber (rafters)
-1/2″ diameter PVC pipe (purlin)
-1/2″ diameter PVC elbow connectors
-PVC adhesive or primer (optional)
-PVC sealant (optional)
-stain or paint
3. Oriental Corner Pergola
Materials: -4 bamboo poles (10 ft length each) -joint connectors -twine -lightweight fabric Optional: -paint or stain
Step-by-step instructions
Here are the supplies and materials you will need to build a traditional corner pergola:
-4×4 pressure-treated posts
-2×4 pressure-treated lumber
-1/2″ exterior grade plywood
-1×4 cedar lumber
-8′ 2×4 cedar lumber for rafters
-6×6 cedar lumber for posts
-1 lb. box of 16d galvanized nails
-1 lb. box of 8d galvanized casing nails or screws
-Construction adhesive
-Cypress or cedar tone stain/sealer
Instructions:
1. Cut the 4×4 pressure treated posts to eight feet in length. If you want a taller pergola, you can certainly adjust the height of the posts. Just be sure to adjust the lengths of the other lumber accordingly.
2. Cut the 2×4 pressure treated lumber into eight foot lengths. These will be used for the floor joists of the pergola.
3. Cut the 1/2″ exterior grade plywood into four foot by eight foot sheets. You will need two sheets for this project. These will be used for the roof panels of the pergola. If you want a different size or shape for your pergola, you can certainly adjust these dimensions as well. Just be sure to adjust the sizes of the other lumber accordingly.
4. Cut the 1×4 cedar lumber into eight foot lengths. These will be used for trim around the edge of the roof panels.
5. Cut eight 2×4 cedar rafters to six feet in length each using a miter saw set at a 45 degree angle . These will form the top framework of your pergola roof panels.. Place two rafters on each side of each plywood panel so that they are spaced evenly apart.. Be sure that all cuts are made with a sharp blade to avoid any splintering or damage to the wood.. Also, make sure that all edges are smoothed with sandpaper before continuing with assembly.. Once all cuts are made and all pieces fit together properly, it is time to begin assembly..
6. Begin by attaching two 6×6 cedar posts to concrete footings or piers using lag bolts and washers . The simplest way to do this is to mark where you want your posts to go, then dig a hole about two feet deep and fill it with concrete.. You can then set your post in place and use a level to make sure it is plumb (vertical) and then brace it in place until the concrete sets up.. Once your posts are secure, you can begin attaching your floor joists.. Simply nail or screw them into place (we recommend using screws for added strength) making sure that they are parallel and level with each other before moving on.. Once all your floor joists are in place, it is time to attach your roof panels… First, lay one sheet of plywood down on top of your floor joists and then predrill holes every few inches around its perimeter as well as along its centerline… Next, apply construction adhesive liberally along its edges as well as along its centerline before setting your second sheet of plywood on top… Be sure that both sheets are flush with each other before nailing or screwing them together (again we recommend screws) along their edges making sure that no gaps remain… finally , trim any excess plywood from around their edges using a jigsaw.. You should now have a solid piece four feet by eight feet in size… To finish assembling your roof panel , simply nail or screw (we recommend screws) your 2×4 rafters into place making sure they are perpendicular (at 90 degrees) to both sheets of plywood… Be sure they are also spaced evenly apart before moving on… Now is also a good time to stain or seal your entire pergola including all exposed wood surfaces if desired (although this is not strictly necessary if you plan on painting everything later)… Once everything is dry , you can finish attaching trim pieces around all exposed edges if desired using finishing nails or screws (again we recommend screws)… Finally , paint or stain everything as desired … And that’s it! Your traditional corner pergola is now complete!
Rustic Corner Pergola
This type of pergola will add a touch of rustic charm to your backyard. It is perfect for those who want a pergola that is both functional and stylish. The rustic corner pergola is a great choice for those who want to create a focal point in their backyard.
Materials needed
If you’re looking to add a pergola to your backyard, you may want to consider a rustic corner pergola. These pergolas are perfect for any home with a rustic or country-inspired décor. But before you start shopping for materials, it’s important to know what you’ll need to build your pergola. Here’s a list of materials you’ll need for a typical rustic corner pergola:
-4×4 posts: You’ll need four posts for a corner pergola. If you want your pergola to be extra sturdy, you can use 6×6 posts instead.
-2×4 beams: You’ll need two beams for the roof of your pergola. If you want a heavier roof, you can use 2×6 beams instead.
-1×6 boards: You’ll need eight boards to create the sides of your pergola. If you want wider sides, you can use 1×8 boards instead.
-Roofing material: You’ll need some type of material to cover the roof of your pergola. This could be anything from cedar shakes to corrugated metal.
-Stain or paint: You can use any type of stain or paint that you like on your pergola. Just make sure it’s weatherproof so it will last longer.
Step-by-step instructions
Adding a pergola to your home can create a beautiful and inviting outdoor space. But if you have a smaller yard, or if you want to maximize your outdoor living space, you may be wondering how to incorporate a pergola into your design.
One great way to do this is by building a rustic corner pergola. This type of pergola can give you the extra shade and privacy you need while also adding character to your yard.
If you’re not sure how to build a rustic corner pergola, don’t worry! We’ve put together step-by-step instructions to help you get started.
What You’ll Need:
-4×4 posts (pressure-treated lumber is best)
-2x4s (pressure-treated lumber is best)
-Galvanized lag bolts and washers
-Construction adhesive
-Cedar shingles
-Roofing nails
-Stain or sealer (optional)
Tools You’ll Need:
-(2) ladders
-(1) post hole digger or auger
-(1) hammer drill
-(1) drill bit set
-(1) drill/driver
-(1) impact driver
-(1) sawzall or reciprocating saw (optional)
-(1) circular saw
-(1) tape measure -(1) level -(1) square -(1) hammer -(1″ and 3/4″) chisels -(2′) straight edge -(2′) string line
Modern Corner Pergola
A pergola is a great addition to any backyard. It can provide shade, privacy, and a place to relax. If you have a corner in your yard that you’re not sure what to do with, consider adding a corner pergola. Here are three unique corner pergola ideas to get you started.
Materials needed
You will need the following materials:
-4×4 wood posts
-2×4 wood joists
-1×6 wood decking boards
-1×2 wood trim
-Construction adhesive
-Galvanized nails or screws
-Exterior grade paint or stain (optional)
Tools needed:
-Circular saw or chop saw
-Drill/driver
-Hammer
-Tape measure
-Level